Atacama 50 cfm Adsorption Dryer

In stock
£2,570.40 £2,142.00
Quick Overview

ATACAMA PLUS Adsorption Dryer

The ATACAMA point of use dryer is designed with reliability at the forefront, has no shuttle valves and uses only positively driven valves, eliminating any chance of valve failure and extending service periods. The standard unit dries air to a dewpoint of -40C and comes with pre and after filtration. Lower dewpoint models are available on request.

The proven extruded aluminium technology is ideal for an array of applications, including dental, medical, powder coating, printing and laser technology, pneumatic control, plasma cutting and general manufacturing.

The ATACAMA is available from 5cfm to 100cfm and is an off the shelf product for next day delivery.

ATACAMA PLUS Principles of Operation

ATACAMA comprises of aluminium top and bottom valve blocks and extruded aluminium chambers filled with desiccant (DRI-ZORB 27).

The air is dried as the air passes through the desiccant bed. One chamber is drying, whilst the other chamber is regenerating using the PSA principle (Pressure Swing Adsorption). The change is automatic and controlled by the digital controller.

A small amount of the dried compressed air is used to regenerate the saturated desiccant bed by expanding the dry air from line pressure to atmospheric pressure removing the moisture absorbed by the desiccant and therefore regenerating the dryer.

ATACAMA PLUS Dewpoint control

The ATACAMA dryer has fitted as standard a digital controller and a dewpoint control function. This energy saving system requires only a dewpoint hydrometer probe to be added on the dryer to give full dewpoint control with the dewpoint LED displayed in the top right corner of the control panel.

This smart controller can be added to all makes of dryer as an energy saving option.

Write Your Own Review
You're reviewing:Atacama 50 cfm Adsorption Dryer
Your Rating