NUFORS-CR Pneumatically operated level sensed condensate drain
The NUFORS-CR removes condensate from compressed air systems without using electricity.
The discharge process is automatic and is based on a newly developed 3/2 way level controlled valve principle that operates a piston type direct acting valve. The advantage of this valve principle is that the NUFORS-CR’s orifice can be 6 mm, offering an increased reliability factor.
The NUFORS-CR is ideally suited in applications where power is not available, too expensive or not reliable.
In addition, the NUFORS-CR can be applied in applications that demand a higher IP rating (International Protection rating or Ingresss Protection.
The NUFORS-CR offers an IP 68/NEMA 6 rating.
|MAXIMUM COMPRESSOR CAPACITY||100 m³/min.|
|PRESSURE RANGE||3 - 16 bar|
|VALVE TYPE||Direct acting|
|VALVE ORIFICE||6 mm|
|INLET CONNECTIONS||1/2″ (BSP or NPT), 3 inlet options|
|INLET HEIGHT||12 cm (top), 9.7 cm and 1.5 cm (side)|
|OUTLET CONNECTION||1/4" BSP with hose pipe connector|
|MEDIUM TEMPERATURE||1 - 50 °C|
|AMBIENT TEMPERATURE||1 - 50 °C|
|INTEGRATED MESH STRAINER||Yes|
|HOUSING MATERIAL||Corrosion resistant aluminium|
|INGRESS PROTECTION||IP 68/NEMA 6|